The finest scope mount designed for the M16 rifle. Features the A.R.M.S./SWAN ® Universal mounting platform, accepts NATO STANAG and Weaver type scopes, wide angle TV shaped iron sight see-thru, unique self-locking thumbnuts, fits snug in carry handle for continuous zero hold. (Suggested Retail: $59.95)
One of the most versatile mounts on the market. Made of extruded aluminum with a Mil-spec black hardcoat. Quick detachable, multiple eye relief, spring loaded clamping bar, iron sight see-thru. NATO STANAG and Weaver rail fastening, self-locking captivated thumbnuts. Attaches to Weaver type rail and flattop receivers. (Retail $59.95 +shipping & handling)
A.R.M.S.® #6 II Adaptor converts NATO STANAG mounts to A.R.M.S./SWAN(aka Mil-Std. 1913 rails. Mil-spec hard coat finish. For additional eye relief considerations, the rail provides two positions of fastening, via two securing screws (included), which allows the rail to extend to the rear or front. (Retail $49.00 + shipping & handling)
Converts NATO STANAG Scopes to Weaver type rail. Quick detachable, spring loaded clamping bar, self locking captivated thumbnuts, multiple eye relief.(Retail $48.95 + Shipping & handling)
A.R.M.S.® Item #10 ACOG Mt
Multi-position channel mount with self-locking thumbnuts. The #10 mt. is extremely rugged and versatile. The finish is mil-spec black hardcoat, and provides the eye relief options needed for many weapons. Suggested Retail Price: $64.95
A.R.M.S. has succeeded in developing an ultra low profile mounting platform for the Trijicon ® reflex sight. The combination of the A.R.M.S.® repeat zero and patented throw lever system and the reflex sight provide the shooter with built in streamline appearance, function and superb fast action accuracy. The #15 platform is attached to the bottom of the sight by 3 screws that are supplied with the platform, and provides 2 positive locking throw levers with A.R.M.S.® patented no-mar buffer pads, no gunsmithing required. The #15 Reflex mount platform meets or exceeds all mil-spec requirements just like all other A.R.M.S.® standard mil-spec products. (Suggested Retail: $120)
The Single Lever Tri-Lock mount was Developed by A.R.M.S. for small pocket scopes and laser attachments for super compactness. Two (2) solid attachment feet on the right side are firmly held in place with the A.R.M.S.® steel locking foot and lever on the left side. Standard STANAG width channel, allows secure laser or N.V. optic attach-ment at two points. Repeat Zero Hold with easy on and off. (Suggested Retail: $77)
Since its introduction to the marketplace in 1989, this foundation has maintained its reputation as being the best mounting systems for the M21/14 Rifle. The A.R.M.S.® #18 offers interchangeability of Day & Night Vision, with an ultra low profile and the A.R.M.S., SWAN ® aka Mil-Std. 1913 Rail. Made of 8620 case hardened steel. Precision fit to the base integral with the receiver. Two attaching points plus a third contact point for ultimate stability. (Suggested Retail: $174)
Item #19A
Aluminum base secured by steel feet & levers with A.R.M.S.® no-mar
patented Buffer Pads. Interfaces to M16A1A2, M4 ,also Stinger & AT-4
when M16 mt. Is used in the At-4 & Stinger Brackets. Provides
universal platform, which is the NATO STANAG and Weaver standards combined
for many day and Night Vision optics & lasers. Guaranteed Repeat Zero
Hold. (Suggested Retail: $140)
The A.R.M.S.® #19acog Throw Lever Mount for ACOG® scopes features most of the design of the #19A, with the addition of the ACOG® channel. This mount provides the ACOG® scope three positions of added relief to select from. The aluminum base is secured by A.R.M.S.® steel locking feet and levers and the no-mar patented buffer pads. Fits all Mil-Std Dovetail A.R.M.S.® Rails. (Suggested Retail: $150.00)
NSN 5855-01-300-7424. Designed much like the A.R.M.S.® #19A, without the STANAG or male Weaver capability on the top surface. The top surface is machined to fit the AN/PVS-4 N.V. Scopes. Top surface can be tailored machined to fit other optic bottom surfaces. Fits all Mil-spec. dovetail A.R.M.S.® Rails. (Suggested Retail: $150)
The #21 Rings are all steel with a Mil-spec phosphate finish for ultimate surface protection. Phosphate finish screws and wrench included. Available in Low height (Sold as a Pair). (Suggested Retail: $75)
All Steel 30mm Ring, secured with A.R.M.S.® dovetail system to an extruded aluminum platform. Build in no mar Patented Buffer Pads. Available in Low, Medium, and High heights. (Suggested Retail: $99)
A.R.M.S. Item #22M68 Aimpoint Comp Throw Lever Ring U.S. Pat. No. 5,276,988 & No. 4,845,871
Designed exclusively for the Aimpoint Comp. A.R.M.S. unique ring saddle
allows for optimum surface purchasing for the most secure fit. Ultra
rugged and low mounting that can also be modularly raised via optional
spacer platform at a modest cost. Secured to an A.R.M.S. #17 Platform with
the A.R.M.S. patented Throw Lever system guarantees easy on and off repeat
zero. Built in no mar patented buffer pad. It now fits both the M1 and M2
model variations of the Aimpoint Comp. Sight. (Suggested Retail: $99.00,
Spacer: $7.50)
A.R.M.S.® Quick Detach Throw Lever Pistol Grip. U.S. Pat No. 5,276,988
& No. 4,845,871 (Retail $73.00 + shipping & handling)
Item #35 QD Throw Lever Mount
For those who already use the A.R.M.S.® #35 Q.D. Track Mounting Rings with the A.R.M.S.® #36 OSR and #39 A2 Plus Mount, we now provide the first Modular Track Mounting Throw Lever Rail System in the market place. This magnificent system will allow the soldier or sportsman to accommodate virtually any 30mm optic and in perfect track alignment from Ultra Low to Extra High rings for those very large objective lenses. Suggested Retail Price: $85.50
Designed for those who want optimum optic accuracy without the need of combat built-in iron sights, but need the other capabilities as found on the #38 S-Ex/ Ex Military SWAN® Sleeve. Raise and lengthen your flat top receiver while totally protecting the rifle dovetails. Allows super low mounting for bench rest shooting that extends the standard receiver to handle all length optics. U.S. Pat No 5,142,806 (Retail OSR-Ex $74.75, OSR-S-Ex $89.00 + shipping & handling)
The #37 Ring inserts are all steel with a Mil-spec phosphate finish, for ultimate surface protection. Converts all A.R.M.S.® and other 30mm rings to 1". (Sold as a pair) (Suggested Retail: $29)
The SWAN® Sleeve provides a platform that is semi-permanent to the M16 and other similar weapons. When installed to the A.R.M.S.® designed M16 A3 flat top receiver, the Sleeve height provides a patented flip up rear sight The rear sight provides an A2 type windage adjustment with a std. 250-500m range zero, via the front sight bead. The SWAN® Sleeve protects the flat top receiver, providing dovetail protection bumpers along the entire length. The Sleeve is available in three lengths. The spring loaded rear sight is cleverly designed to repeat zero each time it is released by the easy to activate positive hold release lever, even with arctic mittens. (Suggested Retail: Std - $150, Ext - $165, S-Ex - $180)
Developed by A.R.M.S., Inc. under contract for the U.S. Army/ARMS Laser Combat I.D. (CID) Program. It upgradesA1- A2 M16 weapons to new capabilities that match those of the patented SWAN® #38 Sleeve; for enhancement of the Army's Red Dot Optic/Laser requirements.
The main body of the A.R.M.S.® A2 Plus mount locks into both the carry
handle channel and the handle front support, utilizing two A.R.M.S.®
self-locking thumbnuts. This capability provides rigid support of the
dovetail platform that is extended over the hand-guards; just like the
patented SWAN® Super Extended Sleeve. The A.R.M.S.® A2 Plus now comes
with the A.R.M.S./SWAN®/ aka Mil-Std.1913 rail machined to mate the top
of the carry handle, much like the famous A.R.M.S.® #2 M16A1A2 Scope
Mount. Provides dual mounting capabilities while maintaining the enhanced
iron and optic see thru function. The bi-level mounting capability offers
multiple combinations of attachments, no tools required. The #39 also
features a brush breaker at the front to prevent branches and other
objects from wedging between the hand-guards and the suspended rail.
Optical and laser perfect parallel alignment are achieved, while
eliminating heat and vibrations that may be experienced in barrel mounting
systems. An optional third rail attachment that secures to the left hand
side of the #39 provides two dovetail locking blocks, just as the #38
Sleeve for additional mounting. U.S. & Foreign Patents Pending.
(Retail #39 125.00, #39-SR 3rd Rail $84.00 + shipping & handling)
The A.R.M.S.® Stand Alone Flip-up sight, utilizes the same well proven concept as the rear sight on the SWAN® Sleeve system. The unique design of the spring loaded rear sight, ensures constant battery action and repeat zero. The sight is held in the locked down position by a quick release lever, that prevents the sight from being accidentally engaged, but is as fast as a trigger to release even with arctic mittens. The initial elevation zero utilizes the standard M16/M4 front sight bead. When the sight is released into battery the 250-300 meter aperature is ready for immediate close combat use. For longer ranges the leaf sight aperature is rotated to access the 500-600capability with the built in horizon line feature that helps lead distant targets and lets the shooter square the rifle to counter windage offsets, if the rifle is inadvertently tilted. Other type rear iron fold-down sights require the shooter to push it into position, which means they can be accidentally knocked down at the worst time. The A.R.M.S. spring loaded flip-up sights never let you down, because they're designed to always be there even when going thru brush or being dropped. U.S. Patents No.5,533,292 & No. 5,142.806 (Retail 95.95 + shipping & handling)
Item #45
A.R.M.S.® S.I.R.(TM) System
Selective Integrated Rail System
U.S. Patents and others pending
The S.I.R (TM) System is now being delivered on a first come first serve basis from our current waiting list. It is available in both commercial and military models.
Neither model requires any modification to the carbine except removal of your current hand guards and the Delta ring on the military S.I.R.(TM) model. The S.I.R.(TM)
The S.I.R.(TM) System works with any type front sight you may have. No special tools are required to install. A coin is all that is needed.
The S.I.R.(TM) System allows multiple attachments tailored to the needs of the users mission.
The S.I.R.(TM) System is designed to fit mil-spec flat top receivers from Colt, Armalite and Bushmaster in the 5.56 carbine lengths. There may be other flat top receivers manufactured that the S.I.R. may fit to properly, but we do not guarantee or warrantee S.I.R.(TM) on any flat top receivers other than those listed above.
This modular receiver sleeving system is a hand guard universal mounting system that leaves the barrel totally free-floating while providing a rigid ultra-light platform on which to mount virtually any mission specific accessory like thermal imager, lasers, night vision, optical sight, M203, etc.
The S.I.R.(TM) System is available in other styles and calibers.
| A.R.M.S. Item #59M Full Length Rifle Bi-Level S.I.R. | Sugg. Rtl. $420.00 |
| A.R.M.S. Item #58M Midlength Bi-Level AR15 S.I.R. | Sugg. Rtl. $399.00 |
| A.R.M.S. Item #45M M-4 Carbine S.I.R. | Sugg. Rtl. $399.00 |
| A.R.M.S. Item #51C A2 Carry Handle Carbine S.I.R. | Sugg. Rtl. $369.00 |
Effective February 1,2002 suggested retail price: $399.00. (Does not include #40 Flip-up Rear Sight or #23 Pistol Grip)
A.R.M.S.® Item #28 AT-4 Anti-Armor Bracket - Limited supply available. In service with U.S. Forces. Fits on the AT-4 Launcher. The A.R.M.S.® Item #2 Scope Mount, which accepts NATO STANAG and A.R.M.S./SWAN® (aka Mil-Std. 1913 rails), fits into the Bracket. Price - $150.00
A.R.M.S.® Item #49 M240 Mount. Limited Supply available. Fits to the dovetail rail on the M240 top cover and allows the PEQ Laser and optic to work in unison in a low profile. In service with U.S. Forces. Price: $150.00